How to Use a Pump Atomiser with Glass Bottles
By Neal's Yard Remedies: Natural & organic skin care beauty | Published: 2026-10-20
Category: How-to Guides
Learn how to attach and use a pump atomiser on 200ml glass bottles for mess-free dispensing. Includes step-by-step instructions, common mistakes, and care tips.
Quick answer
To use a pump atomiser with a 200ml glass bottle, simply remove the original cap and press the atomiser pump firmly onto the neck. No tools or assembly are needed—just align, push, and twist slightly to secure it.
Why choose a pump atomiser over a dropper or cap?
A pump atomiser turns a standard 200ml glass bottle into a fine-mist sprayer, which is especially handy for facial toners, setting sprays, or aromatherapy blends. Unlike droppers, it dispenses a controlled mist without waste, and unlike screw caps, it prevents spills when you're in a hurry.
Keep in mind that a pump atomiser works best with thinner liquids like water-based toners or diluted essential oil sprays. Thick oils or lotions may clog the nozzle, so check the consistency of your product before committing to a pump.
What to check before you start
Before attaching the pump, confirm that your bottle has a standard neck size—the atomiser is designed for 200ml glass bottles, so a different size may not fit securely. Also, ensure the bottle is clean and dry inside to avoid contaminating your product.
If you're repurposing a bottle that previously held another product, wash it thoroughly and let it air dry completely. Residual moisture or old product can affect the spray performance and the shelf life of your new contents.
Step-by-step: Attach and use your pump atomiser
- Prepare the bottle: Remove the original cap from your 200ml glass bottle. If the bottle has a tamper-evident seal, peel it off completely. Wipe the neck with a clean cloth to ensure no residue interferes with the fit. Check that the bottle is clean and dry before attaching the pump.
- Attach the pump atomiser: Align the pump's nozzle with the bottle neck and press down firmly. Give it a slight twist to seat it evenly. You should feel it click or settle into place—do not force it if it resists. If the pump doesn't fit easily, stop and check the bottle size; don't force it.
- Prime the pump: Before first use, press the pump a few times without the bottle pointing at anything. This draws liquid up into the tube. You'll see a fine mist after a few pumps; if not, check that the dip tube is fully submerged. If no mist appears, ensure the liquid level covers the tube and try again.
- Use and store properly: Hold the bottle upright and press the pump to spray. Store the bottle away from direct sunlight and heat to preserve the product. Clean the nozzle periodically by running warm water through it. Store upright to prevent leaks and keep the pump clean for consistent performance.
Product facts
- Pump Atomiser (For 200ml Glass Bottle): The Pump Atomiser is designed for 200ml glass bottles and requires no assembly—simply replace the existing cap with the pump for immediate use. This means you can switch your bottle to a spray format in seconds, without any tools or technical know-how, making it ideal for everyday use.
Pump Atomiser (For 200ml Glass Bottle)
